General Info

Hydrogen Technology Applications, Inc was incorporated in the state of Florida in 1997 with the goal of creating a viable source of hydrogen-based fuel. Through the right combination of research and development, re-engineering and technological prowess, HTA has overcome many of the obstacles faced by generations before us, and are adding a technical depth heretofore unavailable. With the development of a more efficient electrolyzer, HTA created Aquygen gas a viable, economical, environmentally and operationally safe fuel source that retains its commercial value by virtue of the relatively low cost of production. Originally, Aquygen gas was introduced to enhance industrial gases used in the soldering, brazing, and cutting industries. However, we quickly realized Aquygen gas could do more than improve the performance of conventional gases Aquygen gas could replace conventional gases completely, improving the quality of the brazed, soldered or cut part while producing less waste. With the development of our vehicle electrolyzer systems, we found that Aquygen gas can be used as a fuel additive for gasoline and diesel engines. We have applied this breakthrough method in two prototype vehicles, experiencing an increase in gas mileage of up to 30 percent, and an increase in horsepower. This system significantly raises the vehicle's level of performance without raising water or oil temperature, and requires only slight modification to the standard mechanical parts. Because the vehicle electrolyzer system is evolutionary, not revolutionary, it utilizes the time-tested technology of the internal combustion engine while improving the performance of that technology.