I would stay away if you have a foreign engine to rebuild. I wanted my engine rebuilt with a new head installed. When I got my engine back the head gasket had a water leak, I took the car back in to have a new head gasket installed (that I supplied) he said he could not find the problem. Then after driving home a little while later not one but two freeze plugs blew out, when I asked to get these fixed he tried to blame it on me for installing the engine wrong. So I check out the head myself, one head nut was stripped out and the rest were not torque correctly. So I pulled the head myself and took photos to show to a more reliable engine builder, they pointed out that both the head and the block had not been machined only block sanded. You would think an engine builder would re-surface the head to block mating surface when installing a new head. So I took the head and block to the reliable engine shop for a complete tear-down. They did say what machining work was done was good quality;

great shop great people had my honda built there and it made a great deal of power over stock 180 to the wheels no turbo and stock it made 95 you do the math! its my daily driver!!

This box is too small to make a full explanation about all that happened in my year dealing with this company, The Guy does very poor work, he is long past caring about the work that he does, after several mishaps I only used him for cleaning parts, after he started stealing the parts to be cleaned I stopped with that too. Not Recommended, use at your own risk.