< See More Results
 
A
B
Miles     Kilometers
  Reset

BMG Metals Inc

Not Rated Not Rated

950 Masonic Ln, Richmond, VA 23223
www.bmgmetals.com
Email this business
(800) 552-1510 Additional Contacts
 
Metal Processing BMG can shear up to 1/2" thick and 12' in length. With its burning equipment, we can burn up to 6" thick in carbon steel and plasma cut stainless and aluminum up to 1-1/2" thick. All other processing capabilities can be subcontracted...read more
Metal Processing BMG can shear up to 1/2" thick and 12' in length. With its burning equipment, we can burn up to 6" thick in carbon steel and plasma cut stainless and aluminum up to 1-1/2" thick. All other processing capabilities can be subcontracted out reasonable rates to get the job done when you want it. Our MG Apollo cutting machines use computer-aided design to cut your custom shapes. Send us a fax showing your drawing or send us your DXF file to download your part into our extensive library of shapes that can be recalled next time you do that same job. Or, if you don't have a drawing, just bring the part in and we can most likely replicate it using our digitizer system. With 5 heads we are able to cut several pieces at once allowing for quicker turnarounds and competitive pricing. Whether its one piece or 1000 pcs, whether its 11ga stainless steel or 6" thick carbon steel, put BMG to work for you. While BMG does no welding, punching, plate bending or other fabricating processes, we will be happy to outsource your job for you, send material to a fabricator of your choice, or recommend a fabricator from the hundreds of quality fabrication shops that do business with BMG Metals. Please inquire. BMG Metals - B & R REBAR With the acquisition of Bowker & Roden (now known as B & R REBAR) in 1997, BMG Metals, Inc. can now offer the full range of reinforcing bar services. From its modern 15,000 square foot facility, located in eastern Henrico County, Virginia, B & R REBAR handles rebar fabrication jobs from 100 pounds to 200,000 pounds. B & R can also supply, from stock, all of your rebar accessories -- high chairs, bolsters, reinforcing mesh in sheets and rolls, tie wire, and smooth dowels. B & R REBAR provides on-site estimating and detailing. Whether it from your cut list or material take-off, or from your detailed plans, B & R can help with your project from inception (or even concept) to the final concrete pour. The B & R and BMG team stocks rebar from 1/4" smooth rod to #14 deformed in 20', 40' and even 60' lengths. All stock is from domestic mills and meets all highway, government, and ASTM specifications. Stocked grades include grade 40 (300), grade 60 (420), and A706 (weldable). B & R also stocks galvanized and epoxy coated reinforcing bars.
 
 

Business Details

Additional Locations

  • 3325 Business Center Drive,,Chesapeake,VA 23323
  • 7600 Wellingford Drive,Manassas,VA 20109
  • 1954 Halethorpe Farms Rd,,Halethorp,MD 21227

Categories

(Edit)
Aluminum, Gratings, Iron & Steel, Stainless Steel, Steel Distributors & Service Centers

Hours of Operation

(Edit)
  • Mon 07:30 AM-05:00 PM
  • Tue 07:30 AM-05:00 PM
  • Wed 07:30 AM-05:00 PM
  • Thu 07:30 AM-05:00 PM
  • Fri 07:30 AM-05:00 PM

Brands

(Edit)
  • AK Steel
  • Ameri Steel
  • Amico
  • Kaiser
  • Mittal
  • More
  • North American Stainless
  • Nucor
  • Service Center Metlas
  • Steel Dynamics
  • Thyssen Krupp
  • Less

Payment Options

(Edit)
  • American Express
  • Credit Terms Available
  • Debit Cards
  • MasterCard
  • Personal Checks
  • More

Certification & Affiliations

  • North American Steel Alliance

Areas Served

  • VA, Maryland, Washinton DC, Virginia and North Carolina

Products & Services

(Edit)
  • Aluminum
  • Angles
  • Ball Screws
  • Beams
  • Cans
  • More
  • Certifications and MTRS availalble on all products
  • Channels
  • CNC
  • Custom Shape Burning
  • Customized Stock Programs
  • DFARS Compliant
  • DXF
  • FINISHES
  • Flux & Metal Powders
  • Metal Plates
  • Nationwide Metal Sourcing
  • Pipes
  • Plasma Cutting & Plasma Arc
  • Precision Aluminum Plate Sawing
  • Rebar Detailing and Fabrication
  • Remnants
  • Rods
  • Rolled Bars
  • Saw Cutting
  • Shackles
  • Shapes
  • Shearing
  • Small Business Qualified
  • Splines
  • Stainless Steel
  • Strapping
  • Tools
  • Tubing
  • Tungsten
  • Less

Specialties

(Edit)
  • Cold Finished Bar, Galvanized Steel

Additional Information

  • Steel, Aluminum, Stainless, Sheets - Plates - Bars, Gratings, Expanded Metal, Carbon Steel: Galvanized Steel, Aluminum, Stainless Steel, Brass/Copper

In Business Since

  • 1963

Customers Served

  • Residential, Commercial, Industrial

Ownership

  • Locally owned
  • Family Owned
 

Reviews

Not RatedNot Yet Rated | Write a Review

Blogs


 
 
Browse to locate your photos. All photos are subject
to review and take at least 24 hours to appear on the site.

JPEG or GIF only, no larger than 5MB
Enter a title for your photo and upload.

By uploading a photo you are agreeing to our Photo Guidelines
 
Data provided by one or more of the following: Dex Media, Acxiom, Infogroup
 
User Generated Content Guidelines
    Edit this Business Info - Publishing Guidelines
  • User provided updates will not over-write updates provided by the business owner.
  • Superpages.com's editorial department will review the updates, but does not validate the updates with the business.
  • Information provided will be screened and must meet the Content Guidelines before it is published on Superpages.com.
  • Superpages.com reserves the right to remove any content that does not conform to policy.
  • By submitting information, you are granting Superpages.com permission to publish the information you provided.
  • Most submissions take at least 24 hours and may take up to a week to appear online.
    Photos - Publishing Guidelines
  • For photos to publish, the user has to be a registered Superpages.com user.
  • The user will receive an email from Superpages.com asking them to click the link verifying that the photo can be published on Superpages.com.
  • All photos will be edited by Superpages.com staff.
  • The photos must meet the Superpages.com Photo Guidelines.
    • The Content was created by me or by my employees or by a third party who has given me written permission to use the Content in the manner contemplated by the Application.
    • If the Content includes a person or persons, I have obtained from each person in the photo the unrestricted right to use the photo.
    • I have the unrestricted right and authority to use the Content in any media and in any advertising published under the Application in the way it is used.
  • Superpages.com reserves the right to remove any content that does not conform to policy.
  • By submitting information, you are granting Superpages.com permission to publish the information you provided.
  • Most submissions take at least 24 hours and may take up to a week to appear online
    Business Blogs - Publishing Guidelines
  • For Business Blogs to publish, the user has to be a registered Superpages.com user.
  • The user will receive an email from Superpages.com asking them to click the link verifying that the blog can be published on Superpages.com.
  • Blogs will be edited by Superpages.com staff.
  • The Blogs must meet the Superpages.com Content Guidelines.
  • Superpages.com reserves the right to remove any content that does not conform to policy.
  • By submitting information, you are granting Superpages.com permission to publish the information you provided.
  • Most submissions take at least 24 hours and may take up to a week to appear online.
    Abuse Policy
  • Content that is not acceptable can be reported through our Report Abuse link. Superpages.com staff will review all reports and remove those that violate policy.
  • The following may be considered abusive and lead to the removal of content:
    • Profane, obscene, abusive, offensive, objectionable, unintelligible language.
    • Adult material, including graphic images, written images, URLs, or links.
    • Negative comments about individual employees, including names.
    • References to another company, whether by name, domain name, trademarks or service marks.
    • Malicious intent

Metal Processing BMG can shear up to 1/2" thick and 12' in length. With its burning equipment, we can burn up to 6" thick in carbon steel and plasma cut stainless and aluminum up to 1-1/2" thick. All other processing capabilities can be subcontracted out reasonable rates to get the job done when you want it. Our MG Apollo cutting machines use computer-aided design to cut your custom shapes. Send us a fax showing your drawing or send us your DXF file to download your part into our extensive library of shapes that can be recalled next time you do that same job. Or, if you don't have a drawing, just bring the part in and we can most likely replicate it using our digitizer system. With 5 heads we are able to cut several pieces at once allowing for quicker turnarounds and competitive pricing. Whether its one piece or 1000 pcs, whether its 11ga stainless steel or 6" thick carbon steel, put BMG to work for you. While BMG does no welding, punching, plate bending or other fabricating processes, we will be happy to outsource your job for you, send material to a fabricator of your choice, or recommend a fabricator from the hundreds of quality fabrication shops that do business with BMG Metals. Please inquire. BMG Metals - B & R REBAR With the acquisition of Bowker & Roden (now known as B & R REBAR) in 1997, BMG Metals, Inc. can now offer the full range of reinforcing bar services. From its modern 15,000 square foot facility, located in eastern Henrico County, Virginia, B & R REBAR handles rebar fabrication jobs from 100 pounds to 200,000 pounds. B & R can also supply, from stock, all of your rebar accessories -- high chairs, bolsters, reinforcing mesh in sheets and rolls, tie wire, and smooth dowels. B & R REBAR provides on-site estimating and detailing. Whether it from your cut list or material take-off, or from your detailed plans, B & R can help with your project from inception (or even concept) to the final concrete pour. The B & R and BMG team stocks rebar from 1/4" smooth rod to #14 deformed in 20', 40' and even 60' lengths. All stock is from domestic mills and meets all highway, government, and ASTM specifications. Stocked grades include grade 40 (300), grade 60 (420), and A706 (weldable). B & R also stocks galvanized and epoxy coated reinforcing bars.