< See More Results
 
A
B
Miles     Kilometers
  Reset

Technical Micronics Control Inc

210 Wynn Dr NW, Huntsville, AL 35805
View Website
(256) 837-4430 Additional Contacts
 
Based in Huntsville, Alabama, USA, Technical Micronics Control, Inc. (TMC) was founded in 1965 with an initial focus on supporting precision chemical cleaning projects for NASA, the Army Missile Command, and their respective contractors.TMC has devote...read more
Based in Huntsville, Alabama, USA, Technical Micronics Control, Inc. (TMC) was founded in 1965 with an initial focus on supporting precision chemical cleaning projects for NASA, the Army Missile Command, and their respective contractors.TMC has devoted three decades to meeting the service challenge presented by Government and industry in an ever-changing need for environmental pollution control and precision cleaning and testing techniques. TMC has continued to develop its expertise in environmental pollution control and precision chemical cleaning and testing, and has also expanded into a number of synergistic areas: Precision Chemical Cleaning: Components (valves, tanks, fittings, cylinders, parts, etc.)Gas tubing supply lines (Nitrogen (GN2), Oxygen (LOX), air, etc.)Piping systems (air, water, gases, etc.)Environmental Services: TMC is dedicated to helping you protect the environment, assure the sustained safety of your workplace, and ensure the continued health of your employees.Non-Destructive Testing: TMC's Non-Destructive Testing Division provides ultrasonic analysis, radiographic analysis, Eddy Current inspection, Magnetic Particle examination, and Dye Penetrant inspection. These Non-Destructive tests can be provided on-site at the customer's facility or in-house at TMC's Huntsville, Alabama location. Industrial Valve (Repair and Refurbishment): TMC's Industrial Valve Division services industrial, commercial, and government clients with testing, inspection, repair, and refurbishment of valves. Services include on-line testing, removal, repair, and installation of ALL industrial type valves including safety, relief, and safety-relief valves. Inspections and service can be provided on-site at the customer's facility or in-house at TMC's Decatur, Alabama location. TMC's in-house facility is equipped to test and analyze for steam, liquid, air, and vacuum. TMC holds the National Board of Pressure Vessels Valve Repair certification for Sections 1 & 8, is an authorized repair facility for Hydroseal Safety Valves, and is a Level 1 stocking distributor for a wide variety of iron, steel, and bronze valves. TMC's Industrial Valve Division also includes a Hoist and Crane inspection department, which specializes in the inspection, test, and repair of all lifting devices. TMC personnel hold national certification for crane and hoist inspection. TMC prides itself on providing products and services of the highest quality and reliability, and assures conformance to customer requirements, on-time delivery, and competitive pricing.
 

Business Details

Products & Services

  • & Water TestingChemical and Physical TestingOSHA Compliance/ Industrial Hygiene TestingAudiometrics Testing
  • and environmental services.ISO 9001:2008
  • AS9100 Rev CAir
  • AsbestosNondestructive Testing (MT
  • ET)Precision Chemical CleaningPneumatic & Hydraulic Control PanelsHelium Leak Testing / Custom Tubing FabricationIndustrial Valve Repair/ Refurbishment
  • More
  • pollution control
  • PT
  • repair and refurbishment
  • RT
  • Soil
  • testing
  • TMC provides a wide variety of cleaning
  • UT
  • Less

In Business Since

  • 1965

Hours of Operation

  • Mon-Fri 8am-5pm
 
 
User Generated Content Guidelines
    Edit this Business Info - Publishing Guidelines
  • User provided updates will not over-write updates provided by the business owner.
  • Superpages.com's editorial department will review the updates, but does not validate the updates with the business.
  • Information provided will be screened and must meet the Content Guidelines before it is published on Superpages.com.
  • Superpages.com reserves the right to remove any content that does not conform to policy.
  • By submitting information, you are granting Superpages.com permission to publish the information you provided.
  • Most submissions take at least 24 hours and may take up to a week to appear online.
    Photos - Publishing Guidelines
  • For photos to publish, the user has to be a registered Superpages.com user.
  • The user will receive an email from Superpages.com asking them to click the link verifying that the photo can be published on Superpages.com.
  • All photos will be edited by Superpages.com staff.
  • The photos must meet the Superpages.com Photo Guidelines.
    • The Content was created by me or by my employees or by a third party who has given me written permission to use the Content in the manner contemplated by the Application.
    • If the Content includes a person or persons, I have obtained from each person in the photo the unrestricted right to use the photo.
    • I have the unrestricted right and authority to use the Content in any media and in any advertising published under the Application in the way it is used.
  • Superpages.com reserves the right to remove any content that does not conform to policy.
  • By submitting information, you are granting Superpages.com permission to publish the information you provided.
  • Most submissions take at least 24 hours and may take up to a week to appear online
    Business Blogs - Publishing Guidelines
  • For Business Blogs to publish, the user has to be a registered Superpages.com user.
  • The user will receive an email from Superpages.com asking them to click the link verifying that the blog can be published on Superpages.com.
  • Blogs will be edited by Superpages.com staff.
  • The Blogs must meet the Superpages.com Content Guidelines.
  • Superpages.com reserves the right to remove any content that does not conform to policy.
  • By submitting information, you are granting Superpages.com permission to publish the information you provided.
  • Most submissions take at least 24 hours and may take up to a week to appear online.
    Abuse Policy
  • Content that is not acceptable can be reported through our Report Abuse link. Superpages.com staff will review all reports and remove those that violate policy.
  • The following may be considered abusive and lead to the removal of content:
    • Profane, obscene, abusive, offensive, objectionable, unintelligible language.
    • Adult material, including graphic images, written images, URLs, or links.
    • Negative comments about individual employees, including names.
    • References to another company, whether by name, domain name, trademarks or service marks.
    • Malicious intent

Based in Huntsville, Alabama, USA, Technical Micronics Control, Inc. (TMC) was founded in 1965 with an initial focus on supporting precision chemical cleaning projects for NASA, the Army Missile Command, and their respective contractors.TMC has devoted three decades to meeting the service challenge presented by Government and industry in an ever-changing need for environmental pollution control and precision cleaning and testing techniques. TMC has continued to develop its expertise in environmental pollution control and precision chemical cleaning and testing, and has also expanded into a number of synergistic areas: Precision Chemical Cleaning: Components (valves, tanks, fittings, cylinders, parts, etc.)Gas tubing supply lines (Nitrogen (GN2), Oxygen (LOX), air, etc.)Piping systems (air, water, gases, etc.)Environmental Services: TMC is dedicated to helping you protect the environment, assure the sustained safety of your workplace, and ensure the continued health of your employees.Non-Destructive Testing: TMC's Non-Destructive Testing Division provides ultrasonic analysis, radiographic analysis, Eddy Current inspection, Magnetic Particle examination, and Dye Penetrant inspection. These Non-Destructive tests can be provided on-site at the customer's facility or in-house at TMC's Huntsville, Alabama location. Industrial Valve (Repair and Refurbishment): TMC's Industrial Valve Division services industrial, commercial, and government clients with testing, inspection, repair, and refurbishment of valves. Services include on-line testing, removal, repair, and installation of ALL industrial type valves including safety, relief, and safety-relief valves. Inspections and service can be provided on-site at the customer's facility or in-house at TMC's Decatur, Alabama location. TMC's in-house facility is equipped to test and analyze for steam, liquid, air, and vacuum. TMC holds the National Board of Pressure Vessels Valve Repair certification for Sections 1 & 8, is an authorized repair facility for Hydroseal Safety Valves, and is a Level 1 stocking distributor for a wide variety of iron, steel, and bronze valves. TMC's Industrial Valve Division also includes a Hoist and Crane inspection department, which specializes in the inspection, test, and repair of all lifting devices. TMC personnel hold national certification for crane and hoist inspection. TMC prides itself on providing products and services of the highest quality and reliability, and assures conformance to customer requirements, on-time delivery, and competitive pricing.